OEM & DIY Project - table top, counter top, benches and furnitures
A simple guide to help you understand what produts are needed to build your choice of OEM Project
dassoXTR OEM & DIY Products
1 x 8 Nominal S4S Lumber 3/4+" x 8" x 73-1/4" boards
Planks use as table top, countertop and seatings. Use this as how you would use a piee of wood lumber.
2 x 6 Nominal S4S Lumber 1-1/2+" x 6" x 73-1/4" boards
Planks use as table legs and benches. Use this as you would on a 2" x 6".
1 x 2' x 6' Nominal S4S Panels
3/4+" x 24" x 73-1/4" boards
Use this to rip into lumber of multiple width lumber in 1" thick.
2 x 2' x 6' Nominal S4S Lumber
1-1/2+" x 24" x 73-1/4" boards
Use this to rip into lumber of multiple width lumber in 2" thick.
dassoXTR OEM and DIY Accessories and Finishes
Stainless Steel #7 2-1/4" - XTR Black #38, 100 Screw Pack
Screw in black for holding down decking planks.
Stainless Steel #7 2-1/4" - XTR Black #38, 100 Screws with Smart Bit
Screw in black for holding down decking planks with Smart drill bits.
Face Screw Smart Bit 3 Drills w/Countersink Set #7, Predrill & Countersink
Extra Smart drill bits.
Face Screw Smart Bit Deck Screw Driver w/Depth Setter #7, Screw Depth Setter & Driver
Extra Smart drill bits and Screw Driver.
Eisen Plugs, Screws & Drill Bit Kit
Screws and Plugs to use on area where you need to secure the planks in position.
Pro plug 3 bit set with plug, counterbore & driver for #8
Drill bit use in combination to Eisen Plugs, Screws & Drill Bit Kit
Pro plugs for XTR (without screws or bit) 100 plugs only
Additional fused bamboo plugs to use as screw caps.
Anchor Seal 2 Wax Sealer
End Sealer to prevent cracks and checks on the butt ends of any cuts and ends.
WOCA Oil Natural - 0.75 Ltr
Woca is a Penetrating Oil and is use for touching up the Plugs after they are installed.