Here are few basic steps to determine which RainClad fastener to use.
3. A single screw hole fastener is sufficient in most situation on a residential project not higher than 3 storey (30 feet). Use 3 holes fastener with 2 screws for 3rd storey (30 feet) or higher. For batten option, use 2 fastener in place of one.
4. Use the correct type of screw and screw length for your project.
5. Follow your local city/council code if one existed in your area. The information published here are some general guidelines to install Shiplap RainClad Siding, dassoXTR is not responsible on the choices you made for your project.
Eisen 1/4" Air-gap RainClad Siding Batten Clip with One (1) Hole - 100 Unit
Note : Can be used with 1/2" Batten to create a 3/4" Air-gap matching up to sheathing clip.
Eisen 1/4" Air-gap RainClad Siding Batten Clip with One (1) Hole - 100 Unit
Note : Can be used with 1/2" Batten to create a 3/4" Air-gap matching up to sheathing clip.
Eisen 3/4" Air-gap RainClad Siding Sheathing Clip with One (1) Hole - 100 Unit
Eisen 3/4" Air-gap RainClad Siding Sheathing Clip with One (1) Hole - 100 Unit
Eisen 3/4" Air-gap RainClad Siding Sheathing Clip with Three Holes - 100 Unit
Note: Use fastener with two screws for high wind area and for siding that is above three (3) stories high (35 feet or higher)
Eisen 3/4" Air-gap RainClad Siding Sheathing Clip with Three Holes - 100 Unit
Note: Use fastener with two screws for high wind area and for siding that is above three (3) stories high (35 feet or higher)
Eisen 3/4" Air-gap RainClad Siding Sheathing Clip with Three Holes - 350 Unit
Note: Use fastener with two screws for high wind area and for siding that is above three (3) stories high (35 feet or higher)
Eisen 3/4" Air-gap RainClad Siding Sheathing Clip with Three Holes - 350 Unit
Note: Use fastener with two screws for high wind area and for siding that is above three (3) stories high (35 feet or higher)
Eisen 3/4" Air-gap RainClad Siding Sheathing Clip with Three Holes - 1050 Unit
Note: Use fastener with two screws for high wind area and for siding that is above three (3) stories high (35 feet or higher)
Eisen 3/4" Air-gap RainClad Siding Sheathing Clip with Three Holes - 1050 Unit
Note: Use fastener with two screws for high wind area and for siding that is above three (3) stories high (35 feet or higher)
Philip Pan Head #12 x 1", Type 316 Stainless Steel Screw (Only for use on furring strips and sheathing is concrete)
Philip Pan Head #12 x 1", Type 316 Stainless Steel Screw (Only for use on furring strips and sheathing is concrete)
Hexa-Head Self Drilling #10 x 1" Siding Screw. Type 410 Stainless Steel
Hexa-Head Self Drilling #10 x 1" Siding Screw. Type 410 Stainless Steel
Drip Cap (Special Order Only)
Drip Cap (Special Order Only)
Window Wrap Self Adhesive tape, 25 mil 4" x 100'
Window Wrap Self Adhesive tape, 25 mil 4" x 100'
Multi-purpose waterproofing membrane, 40 mil, 36"x75'
Multi-purpose waterproofing membrane, 40 mil, 36"x75'
F Reveal (Special Order Only)
F Reveal (Special Order Only)
Philip Pan Head #10 x 2", Type 316 Stainless Steel Screw (For Standard wood joist installation, screw has to penetrate studs)
Philip Pan Head #10 x 2", Type 316 Stainless Steel Screw (For Standard wood joist installation, screw has to penetrate studs)
Integral Inside Corner (Special Order Only)
Integral Inside Corner (Special Order Only)
X Corner Molding Trim (Special Order Only)
X Corner Molding Trim (Special Order Only)
J Channel (Special Order Only)
J Channel (Special Order Only)
Vertical Insert (Special Order Only)
Vertical Insert (Special Order Only)
Vertical Retainer (Special Order Only)
Vertical Retainer (Special Order Only)
Siding End-Match Tongue Side Router Bit
Siding End-Match Tongue Side Router Bit
Siding End-Match Groove Side Router Bit
Siding End-Match Groove Side Router Bit
20 Pcs of Rainclad Fastrac for 137 Siding
20 Pcs of Rainclad Fastrac for 137 Siding
20 Pcs of Rainclad Fastrac for 178 Siding
20 Pcs of Rainclad Fastrac for 178 Siding