Here are few basic steps to determine which RainClad fastener to use.
2. Check if your current sheathing wall is sufficiently strong to support the RainClad Siding. For best practice, always attach fastener to wall stud through the sheathing panel. In situation when your sheathing wall is solidly strong, you can attach batten/sheathing clips directly to the sheathing wall and span 24” center to center. However, if your local building code required batten strips on the sheathing wall before fastener can be attached to it, use ½” batten strips and batten clips to form a ¾” air-gap.
3. A single screw hole fastener is sufficient in most situation on a residential project not higher than 3 storey (30 feet). Use 3 holes fastener with 2 screws for 3rd storey (30 feet) or higher. For batten option, use 2 fastener in place of one.
4. Use the correct type of screw and screw length for your project.
5. Follow your local city/council code if one existed in your area. The information published here are some general guidelines to install Shiplap RainClad Siding, dassoXTR is not responsible on the choices you made for your project.
ASD-RC1B-W-100
Eisen 1/4" Air-gap RainClad Siding Batten Clip with One (1) Hole - 100 Unit
Note : Can be used with 1/2" Batten to create a 3/4" Air-gap matching up to sheathing clip.
ASD-RC1B-W-100
Eisen 1/4" Air-gap RainClad Siding Batten Clip with One (1) Hole - 100 Unit
Note : Can be used with 1/2" Batten to create a 3/4" Air-gap matching up to sheathing clip.
ASD-RC1S-W-100
Eisen 3/4" Air-gap RainClad Siding Sheathing Clip with One (1) Hole - 100 Unit
ASD-RC1S-W-100
Eisen 3/4" Air-gap RainClad Siding Sheathing Clip with One (1) Hole - 100 Unit
ASD-RC3S-W-100
Eisen 3/4" Air-gap RainClad Siding Sheathing Clip with Three Holes - 100 Unit
Note: Use fastener with two screws for high wind area and for siding that is above three (3) stories high (35 feet or higher)
ASD-RC3S-W-100
Eisen 3/4" Air-gap RainClad Siding Sheathing Clip with Three Holes - 100 Unit
Note: Use fastener with two screws for high wind area and for siding that is above three (3) stories high (35 feet or higher)
ASD-RC3S-W-350
Eisen 3/4" Air-gap RainClad Siding Sheathing Clip with Three Holes - 350 Unit
Note: Use fastener with two screws for high wind area and for siding that is above three (3) stories high (35 feet or higher)
ASD-RC3S-W-350
Eisen 3/4" Air-gap RainClad Siding Sheathing Clip with Three Holes - 350 Unit
Note: Use fastener with two screws for high wind area and for siding that is above three (3) stories high (35 feet or higher)
ASD-RC3S-W-1050
Eisen 3/4" Air-gap RainClad Siding Sheathing Clip with Three Holes - 1050 Unit
Note: Use fastener with two screws for high wind area and for siding that is above three (3) stories high (35 feet or higher)
ASD-RC3S-W-1050
Eisen 3/4" Air-gap RainClad Siding Sheathing Clip with Three Holes - 1050 Unit
Note: Use fastener with two screws for high wind area and for siding that is above three (3) stories high (35 feet or higher)
ASD-SS10-PAN2-100
Philip Pan Head #10 x 2", Type 316 Stainless Steel Screw (For Standard wood joist installation, screw has to penetrate studs)
ASD-SS10-PAN2-100
Philip Pan Head #10 x 2", Type 316 Stainless Steel Screw (For Standard wood joist installation, screw has to penetrate studs)
ASD-SS12-PAN100
Philip Pan Head #12 x 1", Type 316 Stainless Steel Screw (Only for use on furring strips and sheathing is concrete)
ASD-SS12-PAN100
Philip Pan Head #12 x 1", Type 316 Stainless Steel Screw (Only for use on furring strips and sheathing is concrete)
ASD-SD10-100
Hexa-Head Self Drilling #10 x 1" Siding Screw. Type 410 Stainless Steel
ASD-SD10-100
Hexa-Head Self Drilling #10 x 1" Siding Screw. Type 410 Stainless Steel
ASD-IC34
Integral Inside Corner (Special Order Only)
ASD-IC34
Integral Inside Corner (Special Order Only)
ASD-XC34
X Corner Molding Trim (Special Order Only)
ASD-XC34
X Corner Molding Trim (Special Order Only)
ASD-VI34
Vertical Insert (Special Order Only)
ASD-VI34
Vertical Insert (Special Order Only)
ASD-VRGen
Vertical Retainer (Special Order Only)
ASD-VRGen
Vertical Retainer (Special Order Only)